Bromine plant design and construction

Alkali plant design and construction

Price 1000.0 USD ($)

Minimum Order Quantity : 1

Usage : Soda ash method: (1) Solvay process: Raw materials are salt, limestone, coke, ammonia. It has the advantages of convenient raw material source, good quality and low cost, and continuous production. (2) Joint soda production method: The complete industrial production method of soda ash proposed by the famous Chinese chemist Hou Debang in 1942. Solvay alkali industry and synthetic ammonia industry combined to produce both soda ash and ammonium chloride, with salt utilization rate up to 95%, no large amount of waste liquid, good quality, low cost, continuous production characteristics. The main raw materials are salt, ammonia, carbon dioxide. (3) Joint alkali new process method: This process method is based on years of practice by the company, summarizing the advantages and disadvantages of the Solvay method and the combined alkali process, and is an innovative new process for alkali production. In this process, the discharge of a large amount of waste liquid by Solvay process is abandoned and ammonium chloride is introduced into the combined alkali process to remix the pulp and steam ammonia. The company has developed and innovated complete sets of alkali making equipment matching the process, and its production capacity can reach 50,000 tons/year to 1 million tons/year.

Chemical Name : Caustic soda Soda ash

Molecular Formula : NaOH Na2CO3

Application : Industrial

Calcium chloride production plant construction

Price 1000.0 USD ($)

Minimum Order Quantity : 1

Usage : Calcium chloride: (1) The production of calcium chloride dihydrate by hydrochloric acid: Hydrochloric acid and limestone were put into the reaction tank according to a certain ratio, and the reaction was carried out under agitation to produce acid calcium chloride solution; Add lime milk to adjust the pH of feed liquid; The material liquid is filtered through the plate and frame filter press and clarified in the clarifying tank; After natural circulation evaporation in the singleeffect evaporator, forced circulation evaporation in the twoeffect evaporator, high temperature concentration in the threeeffect evaporator, up to 68%, and then through the slicer for production, into sheet products; Then the belt conveyor enters the vibrating fluidized bed for drying. When the calcium chloride content reaches 7074%, it is transferred to the roller cooler for cooling, and the packaging is stored. It has the characteristics of uniform and stable fluidization, easy maintenance, low noise, long equipment life, high thermal efficiency, good energy saving effect and so on. (2) The use of waste hydrochloric acid to produce anhydrous calcium chloride process: The byproduct hydrochloric acid, waste acid and limestone were put into the reaction tank according to a certain ratio, and the reaction was carried out under agitation to produce acid calcium chloride solution; Add lime milk to adjust the pH of feed liquid; The material liquid is filtered through the plate and frame filter press and clarified in the clarifying tank; The clear liquid is sent into the spray tower to form a very fine mist liquid bead, and the filtered and heated air and flow contact, the water evaporates instantly, and the finished product is dried in a very short time. Through the cyclone powder collector and the cloth bag powder collector, the finished product is entered into the finished powder bin for measurement and packaging. It has the characteristics of fast drying speed, stable product, high purity, good quality, uniform particle, good fluidity, simple production process, convenient operation and control.

Chemical Name : Calcium chloride

Molecular Formula : CaCl2

Calcium carbonate production plant construction

Price 1000.0 USD ($)

Minimum Order Quantity : 1

Chemical Name : Calcium carbonate

Molecular Formula : CaCO3

Construction of fluoride plant

Price 1000.0 USD ($)

Minimum Order Quantity : 1

Usage : Aluminum fluoride: The aluminum fluoride production equipment mainly includes four parts: synthesis and separation device, aluminum fluoride drying device, synthetic mother liquor recovery and production of cryolite and drying device, synthesis tail gas and drying tail gas treatment device. Our company can produce a complete set of dry and wet process equipment, a single set of production capacity can reach 10,000 tons to 30,000 tons.